63 lines
2.5 KiB
Markdown
63 lines
2.5 KiB
Markdown
# Preparing the Operating System for UPIWIN
|
|
|
|
The Raspberry Pi OS needs to be configured with the appropriate device tree support, software, and libraries to compile
|
|
and run UPIWIN successfully. This document describes the process.
|
|
|
|
## Preparing the Operating System
|
|
|
|
1. Download an image of Raspberry Pi OS from
|
|
[the Raspberry Pi Foundation](https://downloads.raspberrypi.org/raspios_armhf/images/). The most-recent version of
|
|
Raspberry Pi OS that is known to work with the PiTFT is
|
|
[the December 4, 2020 image](https://downloads.raspberrypi.org/raspios_armhf/images/raspios_armhf-2020-12-04/).
|
|
2. Unzip the `.zip` file for your image and write th included `.img` file to a fresh MicroSD card using one of the
|
|
methods described on [this page](https://www.raspberrypi.org/documentation/computers/getting-started.html).
|
|
3. Connect your UPIWIN-compatible Raspberry Pi (RPi 3B+ with PiTFT) to power, HDMI display, keyboard, and network
|
|
(if necessary). Insert the freshly-written MicroSD card into the Pi.
|
|
4. Turn on the Pi, boot into Raspberry Pi OS, and set it up. Make sure to get updates installed.
|
|
|
|
## Installing the PiTFT Drivers
|
|
|
|
1. In a terminal window, enter the command `sudo -i` to get a root command prompt.
|
|
2. Enter the following commands:
|
|
|
|
pip3 install --upgrade adafruit-python-shell click
|
|
git clone https://github.com/adafruit/Raspberry-Pi-Installer-Scripts.git
|
|
cd Raspberry-Pi-Installer-Scripts
|
|
python3 adafruit-pitft.py --display=28c --rotation=90
|
|
|
|
3. Answer "N" to the questions about the console appearing on the PiTFT display and mirroring HDMI to the PiTFT
|
|
display.
|
|
4. Reboot the Pi when prompted.
|
|
|
|
## Installing Libraries for UPIWIN
|
|
|
|
1. Use `sudo -i` to get a root command prompt.
|
|
2. Execute the command to install packaged libraries:
|
|
|
|
apt install python3-dev libfreetype6-dev libpng-dev ttf-mscorefonts-installer
|
|
|
|
3. Execute the commands to install the BCM2835 library:
|
|
|
|
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.68.tar.gz
|
|
tar xzvf bcm2835-1.68.tar.gz
|
|
cd bcm2835-1.68
|
|
./configure
|
|
make
|
|
make check
|
|
make install
|
|
|
|
4. Copy the Arial font to where the code expects to see it:
|
|
|
|
mkdir /usr/local/share/fonts/truetype
|
|
cp /usr/share/fonts/truetype/msttcorefonts/arial.ttf /usr/local/share/fonts/truetype
|
|
|
|
## Building the Source
|
|
|
|
After cloning the repository for UPIWIN, enter the following commands:
|
|
|
|
cd upiwin
|
|
make
|
|
|
|
To execute, enter the command `sudo src/upiwin` followed by the name of the script to be run. For example,
|
|
`sudo src/upiwin scripts/demo1.py`.
|